Model: pump tube quenching machine
Input power: 160KW
Input voltage: 380V
Oscillating frequency: 15-25KHz
Concrete pump tube 160 within bore induction hardening apparatus may be satisfactory for the diameter of the inner bore 125 of the concrete pump tube quenching, concrete pump delivery pipe wall quenching equipment induction hardening, low loss, high dielectric coaxial structure sensors, inductive length 5 Meter, concretepump tube quenching hardness can reach HRC55 , concrete pump tube quenching large travel speed 300-400 / min, concrete pump tube inner wall hardened layer is 1.5-1.8mm
Delivery tube within the wall of the induction hardening apparatus induction hardening concrete pump apparatus
1, the inner wall of the concrete pumping performance of the induction hardening apparatus described
Concrete pump tube 200 within bore induction hardening apparatus may be made to the diameter of the inner bore 125 of the pump tube concrete hardening, concrete pump delivery pipe wall quenching equipment induction hardening, low loss, high dielectric coaxial structure sensors, inductive length 7 m, Concrete pump tube quenching hardness can reach HRC55 , concrete pump tube quenching large travel speed 500-600 / min, concrete pump tube inner wall hardened layer is 1.5-1.8mm ,
2 , the role of high-frequency wall quenching equipment on the inner wall of concrete pump conveying pipe
The concrete pump tube is made of special material steel tube, which is quenched by internal wall and carburized chemical treatment. The hardness of the flange bushing reaches 58-60 degrees, and the service life of the pipeline is increased by 3-5 times, which saves users time and expense. The trouble of frequent replacements increases production efficiency. No concrete pump tube quenching and hardening of concrete pump pipe performance and life is not the same, through the concrete pump tube quenching can convey more than the last few million cubic meters of concrete.
Third, the concrete pump inner wall quenching machine is composed.
1 , IGBT super audio power supply
2. A set of tooling matched with the power supply: the quenching of the inner wall of the pump tube is required to be uniform during quenching, and the pump tube is required to move at a uniform speed along the shaft. When the pump tube is tilted during quenching, the water during quenching can flow out.
3 , coaxial water-cooled sensor system: This sensor is designed by our company for pump tube quenching. Water is sprayed while quenching to ensure that the pump tube is not deformed.
Fourth, the main technical selection method of high-frequency quenching equipment for concrete pump conveying pipe inner wall : input power 200KVA, three-phase 380 ± 10, oscillation frequency 50-60HZ 25-35KHZ, cooling water pressure ≥ 0.05MPa weight 450kg host volume 1450 × 480 × 1000mm3 extension 500 × 600 × 1000mm3
Copyright© 2007-2013 NO.6 Electric Mall All Rights Reserved