TEL

18037961302
guide
small gantry friction stir wel
Current location:Home > Products > small gantry friction stir wel >

Small gantry friction stir welding equipment

Time:2020-02-14 14:23

Brief description:

Introduction to Friction Stir Welding Technology Friction Stir Welding (FSW) is an advanced solid-phase welding technology. The welding process has a small heat input, the metal does not melt, and there is no element burnout. It can maintai...

Details
Introduction to Friction Stir Welding Technology
Friction Stir Welding (FSW) is an advanced solid-phase welding technology. The welding process has a small heat input, the metal does not melt, and there is no element burnout. It can maintain the metallurgical properties of the base metal and has high joint strength. For high-quality connection of metal materials such as aluminum, magnesium, steel, titanium, and metal-based composites.
Friction stir welding technology features: 1. It can achieve efficient welding of aluminum, magnesium, lead, copper, steel, titanium, metal-based composite materials, dissimilar metals and other materials; 2. It can realize automation, low energy consumption of equipment, high efficiency, Low operating environment requirements; 3. No additional welding wire, no shielding gas required, low cost; 4. No pollution, no smoke, no radiation, safe and green; 5. Low residual stress on the joint, and small welding deformation.
 
Equipment functions and features
The main structure is made of high-strength and high-quality castings. After multiple heat treatments and aging treatments, it has ultra-high rigidity, stability and good seismic performance to meet the large load requirements of the welding process;
Equipped with a dedicated control system for friction stir welding based on Siemens system, which can realize one-touch welding operation of flat two-dimensional curved welding seams; equipped with two manual and automatic control welding operation modes; constant displacement and constant pressure dual mode control mode; pleasant The professional friction stir welding operation interface adopts standard industrial CNC programming language, which is convenient for welding programming. It can be used with automatic loading and unloading system to achieve fully automatic welding and increase the annual work utilization rate of the equipment. The reliable central centralized lubrication system realizes the movement of each axis Central control intermittent automatic lubrication;
Can weld 1-25mm aluminum alloy and magnesium alloy, 1-8mm copper alloy material; green energy-saving LED work lighting device.
Widely used in scientific research and various industries:
Automotive industry: aluminum alloy wheels, battery trays, water-cooled sleeves, rear axles, car body panels, stitched blank bodies, foam aluminum structures, etc .;
Power electronics industry: finned radiators, liquid-cooled radiators, heat sinks, water-cooled plates, water-cooled boxes, etc .;
Train industry: vehicle body, side wall, floor, roof, pillow beam, coupler plate, etc .;
Weapon industry: torpedo cylinder, missile shell, armored body and integrated display terminal, etc .;
Smelting industry: cathode conductive beam, cathode plate, anode plate, etc.
Configuration parameters of small gantry friction stir welding equipment

Equipment model DH-FSW-1512-08 DH-FSW-1512-16 DH-FSW-1517-08 DH-FSW-1517-16
Welding materials Aluminum, copper, magnesium, steel, titanium
Weld Type Straight and flat 2D curves
Welding thickness 1-8mmAluminum alloy  2-16mmAluminum alloy 1-8mmAluminum alloy  2-16mmAluminum alloy
Equipment size (mm) 5000*2500*3000 5000*2500*3000 5500*2500*3000 5500*2500*3000
Table size (mm) 1500*1000 1500*1000 1700*1400 1700*1400
Gantry span (mm) 1200 1200 1500 1500
Welding space (mm) 600 600 600 600
X-axis travel (mm) 1600 1600 1700 1700
Y-axis travel (mm) 1200 1200 1500 1500
Z axis travel (mm) 500 500 500 500
X axis maximum feed rate (mm / min) 12000 12000 12000 12000
Y axis maximum feed rate (mm / min) 12000 12000 12000 12000
Z axis maximum feed rate (mm / min) 2000 2000 2000 2000
Spindle speed (rpm) 4000
B-axis inclination ± 5 ° continuously adjustable
C-axis travel N * 360 °
Bed castings Our factory HT250 is tempered twice
Control System Siemens / Taiwan New Generation
Lead screw Japan THK
Bearing Germany FAG
guide Shanghai taiwan
Coupling Germany R + W
 
Remarks: Friction stir welding equipment can be designed separately according to customer needs.
 

 


Consultation

Message box

  • Product:

  • Message:

  • Company:

  • Name:

  • TEL:

  • Email:

  • Address:

Related Product

Copyright © 2019-2020 Songdao friction stir welding equipment Manufacturing Co., Ltd.  

Address:LUOYANG HENAN CHINA Tel:18037961302 Email:firstfurnace@gmail.com

Add me

Tel

18037961302

Scan and contact us